Vapor Diffusion Ports, Hygric Buoyancy, and Fruit - Short #277

In this short podcast episode, Bryan talks about some building science concepts, including vapor diffusion ports, hygric buoyancy, and... fruit packaging?

Much of building science wisdom over the past couple of decades has dealt with air sealing (just seal it tighter!). However, building tightness has a darker side: more difficulty drying. When buildings can't dry, moisture accumulates and leads to rot.

Air leaks and vapor diffusion are NOT the same thing. Vapor diffusion refers to water vapor diffusing through surfaces into the home (through the materials of walls, floors, etc.). Air moves much more water than vapor diffusion, so air leaks are a bigger problem in terms of moisture. Therefore, air barriers matter more than vapor barriers... until the air barrier battle has been won.

Hygric buoyancy refers to moist air's lower density than dry air, so wet air rises toward the attic (and then the attic peaks). While sealed attics are excellent, moisture can accumulate at the roof deck, especially when the roofing cools at night. The condensation is worsened by using open-cell foam, as open-cell foam is air-closed but vapor-open (whereas closed-cell foam is air-closed AND vapor-closed). Drying isn't needed if you can KEEP the moisture out of closed-cell foam. Open-cell foam requires a place for vapor to go.

Vapor diffusion ports are airtight, controlled vapor-open outlets at the highest points of sealed attics. A cap protects them from bulk water, and they consist of a membrane that blocks air but allows vapor to exit. Unlike a ridge vent, ventilation is not the goal of a vapor diffusion port; it is drying by diffusion rather than airflow and acts as a controlled pressure-relief valve for moisture. Vapor diffusion ports have been proven to be effective at drying and preventing roof rot in humid climates (but NOT ALL climates). They do not work against bulk water intrusion, in cold climates, or when used as vents. Vapor diffusion ports work like fruit packaging, which is designed to let oxygen in and CO2 out, while controlling moisture and slowing decay.

 

Have a question that you want us to answer on the podcast? Submit your questions at https://www.speakpipe.com/hvacschool.

Purchase your tickets or learn more about the 7th Annual HVACR Training Symposium at https://hvacrschool.com/symposium.

Subscribe to our podcast on your iPhone or Android.

Subscribe to our YouTube channel.

Check out our handy calculators here or on the HVAC School Mobile App for Apple and Android.