Episode 45 - Gel Varnish, Router Table In Table Saw Wing, Cope & Stick Bits, & MUCH More!

Support us on Patreon: https://www.patreon.com/woodshoplife

Guy:

1) Always enjoy listening to your podcast while working in my shop. I recently saw Huy using a router set to cut cope and stick joints for some cabinet doors.  I have a similar set by Freud that I have used to cut many similar joints over the past several years.  My set has not been cutting very well the last few times I used it so I took it to have it professionally sharpened. It's no better now than before, maybe worse. Should I try having them sharpened again, or is this just the nature of the beast?

Keep up the good work on the podcast. -John

2) Sharpening vs replacing.  I’m still running straight knives on my planer and jointer and always wondered what makes more sense between the two.  The local Rockler and Woodcraft stores offer send away sharpening for these and all other blades and bits.  It’s about $20-25 for a set of blades to get sharpened, but they’re about the same to just replace them.  I could be just getting the “cheaper” blades as they’re not carbide tipped or anything special.

 What are your thoughts?  I know table saw/miter saw blades are different and seem to last longer.  What were your methods before going to helical everything? Joey

 

 

Sean:

1) New to woodworking, love the podcast, learned a ton from you guys so far! My question is about determining moisture in wood when purchasing. I’ve heard you guys talk a lot about needing to sticker wood and let dry before beginning a project, but how does a person know when choosing pieces from their local dealer, what the moisture level is? Does everyone just take a moisture meter with them when selecting boards? Or is there some other way to know which pieces will allow me to start on a project sooner than later? If I want to build a table for example, I don’t want to have to wait two years for my lumber to dry before starting the project. Again, I’m new to woodworking, so apologies if this seems elementary. -Tony

2) Just watched an episode of Woodsmith Shop on my local PBS channel.  They were making a white oak gentleman's dresser, and used a "gel varnish" for the finish. I have never heard of this before, and I was wondering if any of you guys have used it before? They did not identify the make or model of the product, but Old Masters is one of their sponsors, so I suspect it may have come from them.

 

Huy:

1) Enjoy your program very much. How did three intelligent talented young men (yes Guy your are younger then I) living so far apart geographly ever become close friends? My question is I would like to add a good jointer to my modest woodworking shop (https://www.instagram.com/papajimshobbywoodworking/) but due to space constraints a floor model would not fit at this time and a 6 inch model may not always be wide enough. Have been looking online at the Model 40180HC-CT (with carbide tips) jointer from www.cutechtool.com Any thoughts on this or suggestions on a different jointer. I am retired from a carrier in massage therapy now living on Uncle Sams monthly donations and enjoying my hobby. Thank you and have the best day ever. James

2) First, I own a large 27”x43” Incra router table. It takes up a lot of space. Is it worth getting rid of the table and getting the built in router table option on a Sawstop? I realize I probably will lose the Incra fence, but I could get back significant room. 

Tony from Atlanta