Talking points for this episode are:
-Recommendations on when to update a Gen 2 to 2020.0.4
-If someone says their SmartDepth calibration wont do the offset portion (.0 or .1 software) make sure the 2020 shows the planter lowered.
-Make sure liquid pressure sensor module and rate controller are plugged into same row/location with the same jumper color
-Internal battery failure warning on Gen 3
-Flow rate adjustments-use the worksheet attached here and available on the cloud under vapply->install resources. It is worth reading over it in advance.
-Watch out for growers getting CAN A and B swapped when hooking up to a planter for the first time.
-Gen 3 on .1 software, make sure that the 16" display is being plugged into a DBM on .1 software before connecting for the first time.
-Gen 3 on .1, be sure to select the row unit type in the planter profile or DeltaForce load cells will show up yellow. Also make sure they are zeroed.
-Gen 3 on .0 or .1 software, make sure that there is a control widget set up and enabled for every product, even for products like flowsense and smartconnectors.
-
108: Spring Updates for May 30, 2024
107: Spring Updates for May 23, 2024
106: Spring Updates for May 16, 2024
105: Spring Updates for May 9, 2024
104: Spring Updates for May 2, 2024
103: Spring Updates for April 25, 2024
102: Spring Updates for April 18, 2024
101: Spring Updates for April 11, 2024
99: Best Resources For Spring
98: Radicle Agronomics
97: Planning An Agronomy Day
96: What To Do When The "Standard Setting" Doesn't Work
95: Planning An Effective Planter Clinic
94: The Buzz Around Biologicals
93: Precision Planting in Southern Europe
92: Where's My Dealership Headed
91: Finding Good Limited Release Growers
90: Navigating High Interest Rates
89: The History of Precision Planting
Create your
podcast in
minutes
It is Free
The Commercial Edge: Unleash the Power of People
The emPOWERed Half Hour
NABOR® TALKS
U.S Property Podcast
Aligned Money Show
The Ramsey Show
Planet Money