Safety Stripes by Mighty Line Floor Tape - The Best Workplace Safety podcast talking NFPA, EHS & Warehouse Safety Tips!

S6 Ep310: Warehouse Safety Tips | Episode 310 | A Mighty Year in Review

Welcome to the Warehouse Safety Tips Podcast, where we share insights, ideas, and innovations that help facilities stay safe and efficient! Today’s episode is a special one — “A Mighty Year in Review.”  We’re looking back at an incredible year for Mighty Line and the entire warehouse safety community.  This year, Mighty Line experienced tremendous momentum — growth that exceeded expectations and  set new company benchmarks. And it’s all thanks to you: A Moment for Our Friend, Wes Wyatt We also want to take a heartfelt moment for someone very close to our Mighty Line family — our good friend, Wes Wyatt. Wes is taking some personal time off this week.  We invite everyone listening to please keep Wes in your thoughts and prayers. Wes has been a passionate leader, a powerful voice for safety, and a positive force in everything we do.  Wes, if you’re listening — we’re all behind you. Take your time, and know you’re in our hearts.

S6 Ep309: Warehouse Safety Tips | Episode 309 | Safe Stacking and Load Limits

https://jo.my/n6khdj Material Storage & Racking Safety: Safe Stacking and Load Limits Keeping a warehouse running efficiently depends on more than just fast movement and good organization. One often overlooked area is how materials are stacked and stored. Improper stacking doesn’t just lead to wasted space—it can also set the stage for serious injuries, product damage, and even structural failure. That’s why load limits and stacking guidelines matter. This week, we’re focusing on Safe Stacking and Load Limits—and how following a few fundamental principles can prevent significant problems. Whether you're placing pallets, loading a rack, or relocating inventory, it all comes down to making safety-first decisions. A solid safety culture means we don’t just trust the racking system—we understand how to use it properly and effectively. Here are a few ways to make sure your stacking practices stay safe and consistent: Know the weight capacity of your racking system. This isn’t a guesswork situation. Look for the posted limits—or ask if you’re unsure. Overloading racks can cause them to buckle or collapse, and even a single mistake can trigger a chain reaction. Stack materials evenly and symmetrically. Off-balance loads are just waiting to tip. Make sure items are placed with even weight distribution and sit flat against the pallet. Leaning stacks? Not safe. Respect height limits. Those limits are there for a reason. Stacking too high makes it harder to see, increases the risk of tipping, and creates extra stress on the lower levels of your rack. Use only good-quality pallets. Broken boards, missing corners, or sagging wood can lead to spills, equipment damage, and injuries. Check before you stack. If a pallet looks bad, it probably is. Never use racks as ladders or shortcuts. They're designed to hold inventory, not people. If you need to reach something, use a proper lift or ladder. Climbing the rack may seem quicker—but it’s never worth the risk. As always, these are potential tips. Please be sure to follow the rules and regulations of your specific facility. Safe stacking isn’t just a checklist item. It’s part of building a warehouse environment where people can do their jobs without second-guessing the stability of what’s above or around them. When stacks are neat, balanced, and within limits, everyone can focus on the task at hand—without worrying about what might fall next. This might sound basic, but that’s exactly the point. The safest systems are often built on habits so solid that you don’t even have to think twice. Make those habits your standard. Thank you for joining us for another episode of Warehouse Safety Tips. Until we meet next time - have a great week, and STAY SAFE! #Safety #SafetyCulture #StaySafe #StorageHazards #MaterialHandling #RackingSafety #SafeStacking #PalletSafety #LoadLimits 

S6 Ep308: Warehouse Safety Tips | Episode 308 | Storage Hazards

https://jo.my/d8kka3 Material Storage & Racking Safety: Storage Hazards in Warehouses Whether you’re working third shift or early mornings, there’s one thing every warehouse has in common—stuff. And a lot of it. From raw materials to finished goods, pallets to parts, every inch counts. But how and where things are stored? That makes all the difference between a safe workspace and a ticking time bomb. Storage hazards can sneak up fast. You stack a few boxes a little too high. Squeeze one more pallet in a tight spot. Before you know it, you've blocked an exit, buried a fire extinguisher, or created a toppling hazard. It happens. But it doesn’t have to. A strong safety culture means staying ahead of these risks before they become problems. Here are a few ways to keep storage safe and controlled in your facility: Don’t block emergency equipment. You can’t afford to lose time during an emergency. Always keep exits, fire extinguishers, eye wash stations, and control panels fully visible and accessible. Not just “mostly clear”—completely clear. Keep heavy items low. Heavy boxes and materials should be placed on the bottom racks or the floor—not at eye level or higher. If it falls, it’s a serious injury waiting to happen. Use proper lifting techniques and get help when needed. Gravity doesn’t give warnings. Secure stored goods. Shrink wrap. Safety straps. Pallet locks. Use whatever it takes to keep stored items stable and secure. If something looks off-balance, it is off-balance. Take the extra time to fix it. That’s not a suggestion. That’s a safety rule. Keep aisles and walkways clear. Don’t stack, store, or park anything where people need to walk or work. Blocked walkways create trip hazards, slow down response times, and cause congestion. A clean path is a safe path. Watch for pests and water damage. Leaky pipes and hidden pests can quietly ruin inventory—and your racking system. Keep an eye out for soggy boxes, rust, signs of nesting, or chew marks. If something smells off, there’s probably a reason. As always, these are potential tips. Please ensure that you follow the rules and regulations of your specific facility. Creating a safer warehouse doesn’t require new equipment or complex systems. Most of the time, it simply requires awareness, consistency, and a bit of extra effort. That pallet that’s leaning sideways? Fix it now. That box on the top shelf? Bring it down where it belongs. Everyone plays a role in maintaining a safe and efficient workspace. Because in the end, proper material storage isn’t just about keeping things in order—it’s about keeping people protected. Thank you for joining us for another episode of Warehouse Safety Tips. Until we meet next time – have a great week, and STAY SAFE! #Safety #SafetyCulture #StaySafe #StorageHazards #MaterialHandling #RackingSafety #ClearAisles

S6 Ep307: Warehouse Safety Tips | Episode 307 | Tools for Root Cause Analysis

https://jo.my/3ew2xh Incident Reporting & Root Cause Analysis: Tools for Root Cause Analysis If something goes wrong in your facility, how you respond matters just as much as what happened. That’s where incident reporting and root cause analysis come in. These two things help us figure out why incidents happen—and more importantly, how to stop them from happening again. It’s not just paperwork. It’s prevention. Reporting gives us the facts. Root cause analysis provides us with the fix. When done right, they work hand in hand to build a safer warehouse for everyone on the floor. Here’s the thing: incidents don’t always scream for attention. Sometimes it’s a small slip, a near miss, or a pattern that’s just starting to form. Spotting it early and digging into the root cause can keep the next one from being a serious injury. Here are a few ways to strengthen how your facility handles incident reporting and root cause analysis: Start with the 5 Whys. If something seems off, ask “Why?”—five times in a row. Sounds simple, but it helps peel back the layers. For example, A worker trips. Why? There was a cord in the walkway. Why? It wasn’t secured. Why? The cable cover was missing. You get the idea. You’re not just treating the symptom—you’re chasing down the source. Use a fishbone diagram for bigger problems. When it’s not clear-cut, bring in a fishbone diagram—also known as the Ishikawa method. It maps out possible causes like equipment, process, people, or environment. Great for breaking down multi-layer issues without getting overwhelmed. Write it down. All of it. Don’t rely on memory. Document what happened, what was found, and what was done to fix it. Include who was involved, when it was reported, and any immediate actions taken. If it’s not written, it didn’t happen. Look for trends over time. One-off incidents are one thing. But if the same kind of issue keeps showing up? That’s a red flag. Reviewing reports monthly or quarterly can reveal patterns before they lead to bigger problems. Share what you learn. Don’t keep it locked in one department. If a root cause is found and corrected, others can benefit too. Post it on a safety board. Bring it up at shift meetings. Use those lessons to raise the bar across the entire warehouse. As always, these are potential tips for you. Please be sure to follow the rules and regulations of your specific facility. Incident reporting and root cause analysis aren’t just for when something goes wrong. They’re tools to keep things going right. When you treat every incident or near miss like a clue—and not just a checkbox—you’re building real safety awareness. The more eyes on the process, the better. Everyone in the warehouse can help spot hazards, flag concerns, and push for fixes that last. It’s how you stop repeat problems before they start. Thank you for being part of another episode of Warehouse Safety Tips. Until we meet next time—have a great week, and STAY SAFE! #Safety #SafetyCulture #IncidentReporting #RootCauseAnalysis #WorkplaceSafety #StaySafeAtWork

S6 Ep306: Warehouse Safety Tips | Episode 306 | Digging Past “Human Error” to Find Root Causes

https://jo.my/hmhxo0 Incident Reporting & Root Cause Analysis: Digging Past “Human Error” to Find Root Causes In safety, the phrase “human error” gets tossed around a lot. A pallet falls. A worker trips. A forklift crashes into a rack. The quick conclusion? “Someone messed up.” But stopping there doesn’t fix the issue. It just points fingers. Week 4 of our Incident Reporting & Root Cause Analysis focus is all about looking deeper. Not just what went wrong, but why it went wrong—and how to stop it from happening again. That’s where the difference between surface cause and root cause matters. Surface causes are usually what’s visible right away. Root causes are often buried in procedures, training gaps, or system failures. If we want long-term fixes, we need to go past the obvious. Here are a few ways to shift your focus from surface cause to actual root cause: 1. Don’t accept “human error” as the final answer. It’s rarely that simple. Human error is usually a symptom, not the disease. What caused the mistake? Was there a lack of training? Confusing instructions? An unrealistic production deadline? 2. Ask “Why?” more than once. One “why” barely scratches the surface. Ask it five times if needed. Each answer should bring you closer to what really caused the issue. Example: “Why did they fall?” leads to “Why wasn’t the area clear?” leads to “Why wasn’t housekeeping done?” and so on. 3. Review systems, not just people. Blaming a person doesn’t change a system. Look at processes. Were checklists skipped? Were shortcuts taken because of time pressure? Is the layout making safe work harder? 4. Don’t rush to patch it—solve it. Putting cones around a spill after a fall is fine—for now. But why did the spill happen in the first place? Surface fixes are temporary. Root cause fixes are lasting. 5. Track repeated incidents. If you keep seeing the same near-misses or injuries, the issue isn’t random. Look for patterns. That’s where root causes tend to hide. As always, these are potential tips. Please be sure to follow the rules and regulations of your specific facility. Getting to the root cause isn’t about assigning blame. It’s about building a safer facility from the inside out. A strong Safety Culture doesn’t just react—it investigates, adapts, and improves. When we fix the system, we protect the people. And remember—if you ever feel like something “just isn’t right,” trust your instincts. Speak up. Report it. Safety isn’t about silence. It’s about action. Thank you for being part of another episode of Warehouse Safety Tips. Until we meet next time - have a great week, and STAY SAFE! #Safety #SafetyCulture #SafetyFirst #RootCauseAnalysis #IncidentReporting #PreventInjuries #AskWHY #HumanError